Tips On Cleaning Swanstone Sinks




Cleaning Swanstone Sinks – The Durable Finish

cleaning swanstone sinksSwanstone is a kind of building material often used in sinks, bathtubs and countertops. Since these products are solid-surface, they are durable, elegant and expensive. The stone is finished with a protective gloss layer that makes it possible for the tubs, sinks and countertops to resist heat up to 450 degrees, and makes for easy removal of most stains and discoloration. It can also withstand prolonged exposure to chemicals and common corrosive or caustic solvents like, gasoline, and acids from nail polish remover among others. It can resist heavy duty impacts pound per pound up to five times stronger. If you own this type of fixture, cleaning swanstone sinks is like cleaning any ordinary sink; however, special care is needed in removing and cleaning the stains and other unwanted marks, whether stubborn or not.



Here Are Tips On Cleaning Swanstone Sinks:

1. As with other fine sinks, cleaning swanstone sinks, particularly the surface, entails the use of soap, warm water and standard household cleansers. Start by running water in the Swanstone sink to wash away surface debris and at the same time to wet the sink basin. Use warm soapy water and cleansers, spray or wipe the solution along the bottom and the sides of the sink. Then allow it to disinfect the fixture by letting it sit for several minutes. Then using a rug, scrub the sink clean then rinse with warm water thoroughly.

2. To remove stains, use an abrasive cleaner such as Ajax and Comet. Sprinkle evenly on the stained area and using a nylon-scrubbing pad like, the green Scotchbrite pad, scrub it clean.

3. To remove mineral-based stains quickly, remove it by using cleansers designed to remove iron or rust such as Lime Away, Rust Out or Wink. Apply the product on the area and let it sit for a couple of minutes, then wipe it using a damp rag or sponge. Then rinse completely.

4. To remove marks and discolorations, use a white automotive rubbing compound such as 3M Rubbing Compound. Apply the compound on the areas and rub in a circular motion to remove the mark or discoloration. Rinse well.

5. For stubborn stains, fill the Swanstone sink about one fourth full with a 50-50 solution of water and bleach. Let it stand for ten to fifteen minutes, and then drain the solution while washing and rinsing it entirely. Using the water and bleach solution occasionally will help retain the Swanstone sink’s luster and beauty.

6. In case of scratches, use an abrasive pad to remove it. You can also use sandpaper. Start with the coarsest grit and going to the finest grit until the scratch fades. You can blend the areas with an abrasive finishing pad.


Cleaning Swanstone Sinks – Final Thoughts

It is important to remember to never use steel wool or metal scouring pad in scrubbing or cleaning swanstone sinks, especially when it’s the surface that needs care. In using any cleanser or cleaning product always read labels and follow product instructions. Always read the Swanstone manufacturer’s instructions first before cleaning or removing any stains. A Swanstone sink often has limited warranty which you don’t want to put at risk.

Cleaning Swanstone Sinks


One Response to “Tips On Cleaning Swanstone Sinks”

  1. [...] Swanstone Sink Reviews Tags: swanstone sink reviews, swanstone sinks Posted in Swanstone Sinks [...]